Easton Emergency LocksmithMobile locksmith, Easton, PA
Ford key replacement in Easton, PA
F-150, Transit, Escape, Explorer, Focus or Mustang: PATS chip keys, flip keys and Intelligent Access fobs cut and programmed at your vehicle in Easton and the townships.
Ford keys at the truck, because the truck is the job
An F-150 with no key at 6 AM in Palmer Township is a crew standing around. We get that call a lot, and we answer it by going to the truck. F-150, F-250, Transit, Transit Connect, E-Series, Ranger, Explorer, Escape, Edge, Expedition, Fusion, Focus, Mustang, Taurus, Bronco: we cut and program the key where the vehicle sits, in Easton, Forks, Wilson, Bethlehem Township or on the shoulder of Route 33.
Call (484) 891-1922 with the year and model, and tell us how many keys you have. On a Ford that number changes the job. A Ford call ends with our pricing structure and an estimated time of arrival, and only then does the tech set out.

Why the key count matters on a Ford
Ford’s PATS system has a self-service back door, but only if you have two working keys.
Two keys
You can add a third yourself with the two-key cycling procedure in the owner’s manual, as long as the new key is cut and chipped correctly. We can cut and supply that key if that is all you need.
One key
The procedure does not work with one. The truck needs programming equipment to accept a second key. We bring it and add the spare beside your existing key.
No keys
The blade is cut by code from the door lock and the PATS module is put into learn mode, which erases the lost keys and registers the new one. We add a second key in the same visit so you have two again.
Ford keys through the years
Fords before about 1996 to 1999, depending on the model, use a plain key. PATS arrived on the Taurus and Mustang in 1996, the Explorer in 1998, the F-150 in 1999 and the Focus in 2000, putting a chip in the plastic head. For about a decade those chips were a 40-bit type; from around 2011 Ford switched to an 80-bit chip that looks identical but will not program in its place, so the year matters when we pick the blank. Remote-head and flip keys put the buttons in the head and program the remote as a separate step.
Intelligent Access push-button start came to the Explorer, Fusion and Escape in the early 2010s, the F-150 in 2015 and most of the lineup since. Those fobs are paired through the port and carry an emergency blade. Many Fords also have the five-button keypad on the driver door; once we have confirmed ownership we can read the factory code from the module so you are never fully locked out again.
ID and registration or title, or something tying you to the company for a fleet vehicle; we confirm lawful possession as part of the job. Start, doors, tailgate or trunk and remote tested, paper receipt, work guaranteed against defects and craftsmanship.
Ford key questions
The theft light flashes and the truck cranks but will not start.
PATS rejected the key, or the transceiver ring around the ignition has failed. Both show the same symptom. We test the key first, then the ring, so you are not buying a key that would not have fixed it.
Do you do Transit vans for a fleet?
Yes. We can meet several at the yard before the morning run and program a key for each.
My Escape fob went through the wash.
Dry it out for a day and try it. If it is still dead, we supply and pair a new fob at the vehicle and remove the dead one from memory.
Can you make a key for a 1994 Ranger?
Yes. Plain key, cut by code from the lock. One of the quickest jobs we do.