Easton Emergency LocksmithMobile locksmith, Easton, PA
Honda key replacement in Easton, PA
Accord, Civic, CR-V, Pilot or Odyssey with a lost, worn or dead key: cut, programmed and tested at your car in Easton and the townships, one key left or none.
The short version
We come to your Honda in Easton, Palmer, Forks, Wilson or Bethlehem Township, cut the blade, program the chip or fob and test it before we leave. Accord, Civic, CR-V, Pilot, Odyssey, Fit, HR-V, Ridgeline, Passport, Element, Insight, and the older ones. One key left or none at all.
The year decides almost everything about a Honda key, so have it ready when you call (484) 891-1922. We will tell you what the car takes, go over the pricing structure for that key and give you an estimated time of arrival.

How a Honda key gets made in a parking lot
The right blank for the year
Hondas before 2003 use an edge-cut blade. The 2003 Accord started the switch to a laser-cut blade with a groove down the middle, and the Civic, CR-V, Odyssey and Pilot followed over the next few years. We bring both styles.
Cut from the lock, not from a worn key
The code is read from the door cylinder and the blade is cut to it, so the new key matches what the factory made rather than a copy of a copy. Ownership is confirmed first: ID and registration or title.
Chip, remote, test
The chip is registered to the immobilizer. On remote-head keys the buttons are paired as a second step. On Smart Entry cars the fob is paired through the port. Ignition, doors, trunk and remote get tried before we pack up.
Honda keys, year by year
Through the mid-1990s a Honda key is plain metal with nothing inside it. Honda added an immobilizer model by model starting around 1998, so by the early 2000s nearly every Accord, Civic, CR-V and Odyssey carries a chip in a plastic head, often with lock and unlock buttons built into the same head. Those remote-head keys are the ones we replace most around Easton.
Push-button Smart Entry arrived on the Accord in 2013 and spread to the Civic, Odyssey, CR-V and Pilot by 2016. The fob is paired through the diagnostic port and hides a metal blade for the driver door. With a working fob a spare is a short visit. With none, the car is put into learn mode, the lost fobs are erased and the new one registered, which takes a bit longer but is still done at the car.
One Honda habit worth knowing: the ignition cylinders on 2000s Civics and Accords wear until the key sticks or turns freely. If yours is getting hard to turn, a fresh key often fixes it; if the cylinder itself is gone, we replace it at the car and key it to match your door.
Three typical Honda calls
CR-V, only key lost
The all-keys-lost job. Cut by code, immobilizer relearned, old key erased, spare made in the same visit so it never happens twice.
Accord, key light blinking
The green key light means the chip was not read, usually a cracked key head or a shifted chip. A new key is cut and programmed; if the old remote still works it stays on the ring.
Odyssey, fob through the wash
If it is still dead after drying out, a new Smart Entry fob is paired at the van, the dead one is removed from the vehicle and the emergency blade is cut to the door.
Questions Honda owners ask
Do you need my old key to make a new one?
No. We cut from the lock code and program from the car. A working key makes the visit shorter, but it is not required.
Will the new key look like the original Honda key?
The blank is the same shape and the head is the same style. Some are aftermarket parts rather than Honda-branded; they are programmed the same way and covered by our guarantee against defects and craftsmanship.
Can you do it at my job in the Easton industrial park?
Yes. Anywhere from Easton to Kutztown. Tell us the lot and we will give you an estimated time of arrival.
What about my Honda motorcycle or ATV?
Covered. Most Honda bikes use a plain key; the chip-key models are covered too. See the motorcycle key page.